Steel Wall Sconce

  • $195.00
    More Details Steel wall sconce with tapered shade. Designed exclusively by Thomas O'Brien for Generation Lighting. Uses one medium A19 60-watt bulb. Overall: 5.5"W x 5.5"D x 14.5"T. Back plate: 4.5"Dia. x 0.5"D. Cord length: 8 ft. UL approved. Imported. Boxed weight, approximately 6.7 lbs.
  • $185.00
    More Details Steel wall sconce with tapered shade. Designed exclusively by Thomas O'Brien for Generation Lighting. Uses one candelabra torpedo 60-watt bulb. Overall: 5.5"W x 5.5"D x 10.6"T. Back plate: 4.5"Sq. x 0.6"D. Cord length: 8 ft. UL approved. Imported. Boxed weight, approximately 8.1 lbs.
  • $110.00
    More Details Wall sconce made of steel. Designed exclusively by Thomas O'Brien for Generation Lighting. Uses two candelabra G40 60-watt bulbs. Overall: 2.8"W x 2.8"D x 4.5"T. Back plate: 2.5"W x 0.6"D x 4.5"T. Cord length: 8 ft. UL approved. Imported. Boxed weight, approximately 2.4 lbs.
  • $150.00
    More Details Steel adjustable sconce. Glass shade. 20"W x 12.25"D x 8.5"T. Imported. Boxed weight, approximately 3.8 lbs.
  • $90.00
    More Details Hanging steel sconce. Glass shade. 8.5"Dia. x 13.5"T. Imported. Boxed weight, approximately 2.8 lbs.
  • $235.00
    More Details Hanging perforated steel sconce. Glass shade. 7.5"W x 9.5"D x 18.5"T. Imported. Boxed weight, approximately 15.4 lbs.
  • $105.00
    More Details Hanging steel sconce. Glass shade. 8.5"Dia. x 13.5"T. Imported. Boxed weight, approximately 2.8 lbs.
  • $170.00
    More Details Steel adjustable sconce. Glass shade. 20"W x 12.25"D x 8.5"T. Imported. Boxed weight, approximately 3.8 lbs.
  • $935.00
    More Details Steel sconce with three agate discs. Agate piece sizes will vary, 1-2"Dia. Overall: 6.5"W x 4"D x 17"T. Uses one 40-watt bulb. UL listed. Imported. Boxed weight, approximately 9 lbs.
  • $625.00
    More Details Wall sconce made of steel and crystal. Uses two 60-watt candelabrum bulbs. 11.5"W x 8"D x 18.5"T. Back plate included. Direct wire; professional installation required. Imported. Boxed weight, approximately 7.5 lbs.
  • $435.00
    More Details Outdoor wall sconce made of steel. Uses four 60-watt candelabrum bulbs. 14"W x 15.5"D x 17"T. Backplate included. Direct wire; professional installation required. Imported. Boxed weight, approximately 9 lbs. Entryway Lighting Sizing Guidelines: If a single Fixture is being installed, it should be about 1/3rd the height of the door. If 2 fixtures are being installed (one on each side), they can be slightly smaller, about 1/4th the height of the door. Fixtures should be ...
  • $298.00
    More Details Wall sconce made of steel. Uses one candelabra 60-watt bulb (not included). Overall: 8"W x 11"D x 29"T. Back plate: 6"W x 10.5"T. Assembly required. UL approved. Imported. Boxed weight, approximately 7.5 lbs.
  • $599.00
    More Details Handcrafted wall sconce. Brass and mild steel. Uses two 40-watt candelabra bulbs. Shade dimensions: 16"L x 4"W x 8"T. Not outdoor safe. Overall: 4"W x 16"D x 38"T. Imported. Weight, 11 lbs. Boxed weight, approximately 20 lbs.
  • $465.00
    More Details Modern and glamorous natural brass steel and glass wall sconce. Overall, 7.5"W x 9.5"D x 19"T. Uses one 40-watt bulb. Professional installation required. Imported. Weight, 12.3 lbs. Boxed weight, approximately 15 lbs. Please note that this item may require additional shipping charges.
  • $190.00
    More Details Handcrafted antiqued wall sconce. Made of steel and resin with a linen shade. Uses two 60-watt bulbs. 10.5"W x 7.75"D x 22.75"T; shade is 6.75"T. Imported.
  • $745.00
    More Details Wall sconce with a three pronged steel frame finished in antiqued brass suspends a clear glass cylinder shade on a solitary slip hook. Shade dimensions: 8"Dia. x 9.25"T. Uses one 60-watt bulb. Overall: 8"W x 14"D x 15"T. Back plate: 5"W x 1"D x 7.5"T. Imported. Weight, 5 lbs. Boxed weight, approximately 6.5 lbs.
  • $215.00
    More Details The Capsule Collection by Brian Patrick Flynn one-light matte black and textured gold outdoor wall mount. Glass and steel. Shade dimensions: 5"W x 6"D. Overall, 6"W x 7.3"D x 10"T. Back plate: 4.5"W x 0.75"D x 5.5"T. Uses one 60-watt bulb. Imported. Weight, 5 lbs. Boxed weight, approximately 8 lbs. Please note that this item may require additional shipping charges. Entryway Lighting Sizing Guidelines: If a single Fixture is being installed, it should be about ...
  • $445.00
    More Details Modern and glamorous polished nickel steel and glass wall sconce. Overall, 7.5"W x 9.5"D x 19"T. Uses one 40-watt bulb. Professional installation required. Imported. Weight, 12.3 lbs. Boxed weight, approximately 15 lbs. Please note that this item may require additional shipping charges.
  • $535.00
    More Details Sconce is made of steel. Designed exclusively by Julie Neill for Visual Comfort. Shade dimensions: 4.5" x 5.5" x 6.25". 5.5"W x 5.5"D x 20.8"T. Back plate: 3.75" x 4.75". Cord length: 10 ft. Bulb type: 40 B. UL listed. Imported.
  • $240.00
    More Details EXCLUSIVELY OURS. Steel and clear acrylic sconce. Polished nickel finish. Uses one 60-watt bulb. Shade dimensions: 7"T. Overall, 10"Sq. x 19"T. Imported. Weight, 20 lbs. Boxed weight, approximately 24 lbs.
  • $445.00
    More Details Steel and crystal sconce. Uses four 60-watt bulbs. Overall: 4.5"W x 30"D x 9"T. Back plate: 4.75"Dia. Imported. Weight, 9 lbs. Boxed weight, approximately 20 lbs.
  • $445.00
    More Details Steel sconce with acrylic tail. Uses one 60-watt bulb. Approx. 21.5"H x 6"W x 7.75"D. Imported. Boxed weight, approximately 5 lbs.
  • $285.00
    More Details Steel sconce in gold finish. Uses one 25-watt bulb. Approx. 22"H x 4.25"W x 4"D. Imported. Boxed weight, approximately 4 lbs.
  • $575.00
    More Details EXCLUSIVELY OURS. Handcrafted sconce. Laser-cut steel frame. Hand-applied crystal beads. Faceted clear crystal Overall, 10"W x 5"D x 24"T. Uses two 60-watt bulbs. Imported. Weight, 7.8 lbs. Boxed weight, approximately 9.6 lbs. Please note that this item may require additional shipping charges.
  • $400.00
    More Details Steel sconce with acrylic and resin back plate. Uses one 40-watt bulb. Overall: 7"W x 6"D x 26"T. Back plate: 5"W x 0.75"D x 25"T. Imported. Weight, 12 lbs. Boxed weight, approximately 15 lbs.
  • $288.00
    More Details Steel sconce with 3D flower accent. Uses one candelabra 60-watt bulb (not included). Overall: 6.5"W x 7"D x 10.75"T. Back plate: 6.5"W x 6"T. Assembly required. UL approved. Imported. Boxed weight, approximately 4.5 lbs.
  • $115.00
    More Details Steel one-arm sconce. Glass details. 10.2"W x 9.6"D x 13.4"T. Imported. Boxed weight, approximately 3.5 lbs.
  • $255.00
    More Details Steel bar sconce. Two glass shades. 19.75"W x 10.25"D x 10.5"T. Imported. Boxed weight, approximately 6.2 lbs.
  • $350.00
    More Details Steel bar sconce. Three glass shades. 30.75"W x 10.5"D x 11"T. Imported. Boxed weight, approximately 6.8 lbs.
  • $235.00
    More Details Hanging perforated steel sconce. Glass shade. 7"W x 10.25"D x 13.25"T. Imported. Boxed weight, approximately 3.6 lbs.
  • $180.00
    More Details Steel bar sconce. Three glass shades. 23"W x 7.5"D x 12.5"T. Imported. Boxed weight, approximately 5.9 lbs.
  • $290.00
    More Details Steel sconce in brushed brass finish. Adjustable arm. Conical glass shade. 10.5"W x 30.75"D x 11"T. Imported. Boxed weight, approximately 5.5 lbs.
  • $230.00
    More Details Steel bar sconce. Four glass shades. 26.5"W x 7.5"D x 12.5"T. Imported. Boxed weight, approximately 7.5 lbs.
  • $200.00
    More Details Handcrafted steel sconce with shade. Professional installation required. Shade dimensions: 4.75"Dia. x 7.6"T each. Overall, 5"W x 6"D x 16.5"T. Back plate: 5"W x 8.5"T. Cord length: 8 ft. Imported. Weight, 2.1 lbs. Boxed weight, approximately 3.2 lbs.
  • $450.00
    More Details Steel bar sconce. Four glass shades. 40.75"W x 10.5"D x 11"T. Imported. Boxed weight, approximately 6.6 lbs.
  • $415.00
    More Details Handcrafted steel sconce with shade. Shade: 6.25"T. 9.5"W x 6.75"D x 16"T. Back plate: 4.5"W x 5.75"T. Cord length: 8 ft. Imported. Boxed weight, approximately 2.2 lbs.
  • $385.00
    More Details Steel sconce with crystal tail. Uses one 60-watt bulb. Approx. 22"H x 6"W x 8"D. Imported. Boxed weight, approximately 6 lbs.
  • $350.00
    More Details Transitional Mission Design. Sconce made of glass and steel. 10"x 20" x 8". Electricity note: 1 bulb, A-19 Bulb Type, 100 Watts (not included). UL listed. Weight: 10 lbs. Imported. Entryway Lighting Sizing Guidelines: If a single Fixture is being installed, it should be about 1/3rd the height of the door. If 2 fixtures are being installed (one on each side), they can be slightly smaller, about 1/4th the height of the door. Fixtures should ...
  • $135.00
    More Details Steel bar sconce. Two glass shades. 15.5"W x 7.5"D x 12.5"T. Imported. Boxed weight, approximately 4 lbs.
  • $335.00
    More Details The scalloped edge of the alabaster back plate is soft and subtle, and the arms sleek curves and long tail provide structure. Install the sconce in a bathroom or bedroom. Made of alabaster and steel. Natural and semiprecious materials are products of nature. Any variations in color, pattern, texture, size, and veining should not be considered as a defect. Shade dimensions: 6"Dia. x 5"T. Uses one 40-watt candelabra bulb (not included). Hardwire electricity. Overall: 6"W ...
  • $130.00
    More Details Steel one-arm sconce. Glass details. 10.2"W x 9.6"D x 13.4"T. Imported. Boxed weight, approximately 3.5 lbs.
  • $250.00
    More Details Transitional Urban Design. Sconce made of brass, glass, and steel. 6" x 11" x 7". Electricity note: 1 bulb, A-19 Bulb Type, 100 Watts (not included). Weight: 5 lbs. UL listed. Imported. Entryway Lighting Sizing Guidelines: If a single Fixture is being installed, it should be about 1/3rd the height of the door. If 2 fixtures are being installed (one on each side), they can be slightly smaller, about 1/4th the height of the door. ...
  • $190.00
    More Details Steel sconce with bent arm. Uses one 40-watt bulb. Approx. 12.5"H x 6"W x 12"D. Imported. Boxed weight, approximately 5 lbs.
  • $665.00
    More Details Sconce is made of steel. Designed exclusively by AERIN for Visual Comfort. 6"W x 6"D x 12.5"T. Back plate: 4.25" x 10". Cord length: 10 ft. Bulb type: 40 C. UL listed. Imported.
  • $398.00
    More Details Steel and cast resin sconce. Uses one candelabra 60-watt bulb (not included). Overall: 6"W x 9"D x 38"T. Back plate: 5"Dia. Assembly required. UL approved. Imported. Boxed weight, approximately 6.3 lbs.
  • $470.00
    More Details Steel bar sconce. Four glass shades. 40.75"W x 10.5"D x 11"T. Imported. Boxed weight, approximately 6.6 lbs.
  • $430.00
    More Details Single arm steel sconce with crystal drops. Uses one candelabra 60-watt bulb (not included). Overall: 6"W x 11"D x 18.5"T. Back plate: 7.5"W x 8"T. Assembly required. UL approved. Imported. Boxed weight, approximately 6 lbs.
  • $375.00
    More Details Steel sconce with glass accents. Traditional French country design. Uses two 60-watt torpedo bulbs. 8" wire length. Overall: 13"W x 4"D x 20"T. Can be dimmable if you buy a dimming switch. UL listed. Imported. Boxed weight, approximately 6 lbs.
  • $620.00
    More Details Handcrafted one-light sconce made of steel. Designed by Chapman & Myers exclusively for Visual Comfort. Overall: 4.5"W x 3.5"D x 22.8"T. Back plate: 4.5"Dia. Uses one E12 candelabra 60-watt bulb. UL Only Extension: 3.5". UL listed. Weight: 2 lbs. Assembly required. Clean with a dry, soft cloth only use no harsh abrasives or chemical agents. Imported. Boxed weight, approximately 4 lbs.
  • $398.00
    More Details Steel and cast resin sconce. Uses one candelabra 60-watt bulb (not included). Overall: 6"W x 9"D x 38"T. Back plate: 5"Dia. Assembly required. UL approved. Imported. Boxed weight, approximately 6.3 lbs.
  • $285.00
    More Details Steel sconce. Hanging glass globe shade. Imported. Approx. 3.5"Dia. x 17-55.5"T. Boxed weight, approximately 10 lbs. Entryway Lighting Sizing Guidelines: If a single Fixture is being installed, it should be about 1/3rd the height of the door. If 2 fixtures are being installed (one on each side), they can be slightly smaller, about 1/4th the height of the door. Fixtures should be installed at eye level; the center of the light source should be roughly ...
  • $1,155.00
    More Details Sconce is made of steel. Designed exclusively by AERIN for Visual Comfort. 23.3"W x 23.3"D x 5.8"T. Back plate: 4.5" x 18.5". Cord length: 10 ft. Bulb type: 40 C. UL listed. Imported.
  • $294.00
    More Details EXCLUSIVELY OURS. Sconce made of clear acrylic and steel with a polished-nickel finish. 7.37"W x 6"D x 18.75"T. Uses one 60-watt bulb. Imported. Weight, 12 lbs. Boxed weight, approximately 16 lbs. Please note that this item may require additional shipping charges.
  • $285.00
    More Details Handcrafted sconce with glass alternating clear and opaque glass rods. Steel frame in polished chrome finish. Uses two 60-watt bulbs. Overall: 9"W x 5.5"D x 12"T. Back plate: 4.75"W x 1"D x 8.5"T. Cord length: 8 ft. Imported. Weight, 5 lbs. Boxed weight, approximately 7 lbs.
  • $375.00
    More Details Urban Industrial Design. Sconce made of brass, glass, and steel. Weight: 12 lbs. 10" x 18" x 12". Electricity note: 1 bulb, A-19 Bulb Type, 100 Watts (not included). UL listed. Imported. Entryway Lighting Sizing Guidelines: If a single Fixture is being installed, it should be about 1/3rd the height of the door. If 2 fixtures are being installed (one on each side), they can be slightly smaller, about 1/4th the height of the door. ...
  • $265.00
    More Details Steel sconce. Uses one 40-watt bulb. Overall: 5"W x 6"D x 6"T. Back plate: 5"Sq. x 2"D. Imported. Weight, 3 lbs. Boxed weight, approximately 4 lbs.
  • $198.00
    More Details Sconce made of seedy glass and steel. 7" x 10" x 6". Electricity note: 1 bulb, A-19 Bulb Type, 100 Watts (not included). UL listed. Weight: 5 lbs. Imported. Entryway Lighting Sizing Guidelines: If a single Fixture is being installed, it should be about 1/3rd the height of the door. If 2 fixtures are being installed (one on each side), they can be slightly smaller, about 1/4th the height of the door. Fixtures should be ...
  • $1,115.00
    More Details Outdoor sconce made of steel. 1 ft. cord length. Overall: 5"W x 4"D x 18"T. Steel back plate in antique brass; 4"W x 1"D x 17"T. Uses one integrated 21-watt LED bulb. 110-120 Volt. UL listed. Damp Rated. Designed for use in damp locations but not exposed directly to any water. Common locations include covered porches or bathrooms. Wet-rated fans are designed to withstand exposure to water in outdoor locations such as pergolas and gazebos. ...
  • $500.00
    More Details Steel double arm sconce. Uses two candelabra 60-watt bulbs (not included). Overall: 17"W x 7"D x 31"T. Back plate: 6.5"W x 6"T. Assembly required. UL approved. Imported. Boxed weight, approximately 5.1 lbs.
  • $540.00
    More Details Two-arm sconce featuring tiered, glass drops. Wood frame in Spanish Antique finish. Steel trim in dark bronze finish. Overall: 14"W x 8"D x 21"T. Uses two 60-watt torpedo bulbs. UL listed. Feather dust. Imported. Boxed weight, approximately 6 lbs.